Customers compare 288-07474-2 to these similar products
Products Featured in this Video
Adam: Hi everyone. Adam with etrailer.com. Today we're going to be taking a look at these loading ramps. So these are going to be ideal for our lower trailers, probably about 20 inches or so is what they recommend using these for. These are going to be 48 inches and they are going to be able to hold up to 1,600 pounds.So these do come in a pair of… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area. These are 65…
view full answer...I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…
view full answer...The Stallion #288-07503 Car Hauler Ramps are a total of 14-1/2 inches wide, which includes the raised edges. These ramps would accommodate your 12 inch wide tires but keep in mind that the tire would ride on the raised edges. I'd suggest going…
view full answer...There are a few variables that go into determining the proper torque setting for the lugs nuts once you install your wheel over the Kodiak Disc Brake Kit #K2R35S and it can range from 75 ft-lbs up to 120 ft-lbs depending on your wheel size and the…
view full answer...The Aluminum Car Hauler Ramps #288-07501 are 3-3/4" tall. The tabs that fit onto the edge of the trailer are 1" long. I've linked a photo of these dimensions for you to have a look at, as well. These ramps are designed to work at a…
view full answer...From the sound of your question, it sounds like you are trying to figure out what you need in order to attach your 2021 Nucamp TAB 320S to your 2021 Jeep Wrangler Unlimited Rubicon with an off-road coupler. From my research, I discovered that your…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I have a solution for you. As far as the load rating of the single Stallion Loading Ramp - Steel - 48" Long x 11" Wide #288-07474, it has a weight capacity of 800 pounds. However, when you use the ramp as a pair like the 2 that come with…
view full answer...Drilling a hole in your hitch receiver will void your manufacturer's warranty if something were ever to go wrong with it. For that reason, I think the best solution to use an anti-rattle hitch pin that won't require any drilling, like the…
view full answer...In regards to loading ramps like the Loading Ramp part #288-07474, the length includes the lip/tabs on the top or bottom.
view full answer...Your overall tire diameter would be 21.7 inches. While we do not carry the exact same tire size as what you have we do carry a tire that is very close at 21.9 inches. For that size tire mounted on a 4 on 4 inch bolt pattern wheel you would want part…
view full answer...The #288-07432-2 loading ramp would be an excellent choice for loading a self-propelled snowblower into the bed of your Silverado. The rungs on the ramps will provide excellent traction for both the tires on the snowblower, and for the person loading…
view full answer...