Customers compare STL13RFHXB to these similar products
Products Featured in this Video
Speaker 1: Today we're taking a look at an Optronics LED trailer tail light. This round trailer tail light serves three functions when properly mounted on your trailer; your stop light, your tail light, and your turn signal light. Now, it features the built-in reflux reflector that removes the need for a separate reflector. It's also sonically sealed, so it features a complete waterproof… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Axles that are 3,500 lbs are all 2-3/8 inches in diameter, and that is the diameter of the 3,500 lb Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #35545I-ST-89.
view full answer...The best option to replace your round 5-1/2 inch tail lights are surface-mounted LEDs because they are going to be the brightest, last the longest, and be the easiest lights to mount. There are two options that are similar except for the lenses,…
view full answer...On the LED Trailer Tail Light w/ Reflector #STL13RFHXB the black wire is for the tail/running lights. The red wire is the brake and turn signal lights and the white is the ground. I have attached below a help article that covers the wiring on…
view full answer...The crossbar spread often referred to with roof boxes like #TH6359B or other accessories is measured from center to center. By measuring from the center of the bar to the center of the bar you will get the crossbar spread required for a roof box.…
view full answer...I recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars #RB1800S-3 over the Vortex Aero Bars #RRVA180B-3 because of the weight capacity. The Heavy Dusty Crossbars come in two colors, silver and black #RB1800B-3 and are 71 inches long with a…
view full answer...While I was not able to find anything that cross referenced with the SAE number you mentioned the Optronics light part #STL13RFHXB is very close to what you mentioned in terms of size and function so it would work great. This is a very common style…
view full answer...Thank you so much for your photos. We don't have an exact replacement light for you, but we have something very close. It's the Optronics LED Trailer Tail Light, part #STL13RFHXB. This LED light measures 5-5/8" in diameter (almost…
view full answer...Since the Optronics Two Wire Pigtail, part #A46PB can fit several different lights the thickness would vary depending on the light you are installing this with. I pulled one of the pigtails from our warehouse and took a measurement for you. The depth…
view full answer...I looked up one of your previous order (Thank you, by the way. We love return customers) and what you've gotten in the past are 7-way connectors that use traditional RV wiring. The easiest way to pick them out is that they have a red wire. I…
view full answer...The Uni-Lite Mini LED Side Marker and Clearance Lights, like part #MCL11AKB and #MCL11RKB, are not rated as reflectors. We do have a couple of options that you might consider. Check out the 2-1/2 inch Round LED Trailer Clearance, Side Marker Light…
view full answer...We currently don't stock a 2 inch that is 11/16 inch deep. The closest we have are two and a half inch and 11/16 inch deep LED red lights: #MCL59RB #MCL57RB Another very close option would be Optronics GloLight LED #MCL155RB. It's 2 inch…
view full answer...If you take a look at the photos I've attached you can see how the wires from a 7-way connector can be run to junction box #38656. You would also need ring terminals #44-5310A. I've added a link to a video review, as well as an install of…
view full answer...