Customers compare 44US01R to these similar products
Products Featured in this Video
Today, we're going to take a look at the Jensen top or side mount black rubber mast antenna. Now, this is an AM/FM antenna, it's black in color, has a rubber mast. It is a top or side mount, and you can do that like right now it's set up for a top mount. For a side mount, all you have to do is take a screwdriver to the screw right here in the side, just loosen it up, and that'll allow you to… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03851 will fit the same size opening as the Fan-Tastic Vent Roof Vent that you have now but you will need to use the included garnish that is supplied with the unit that way everything lines up…
view full answer...Jensen doesn't offer the whip portion of the #44US01R antenna as a replacement part. You'll need to get the whole #44US01R assembly in order to replace your missing or damaged whip. I'll link you to a product description video…
view full answer...After speaking with out expert install team I would NOT recommend patching or replacing only part of the membrane. It will just set you up for future leaks and other problems where the seam will be. Since you will have to remove the trim around the…
view full answer...We have previously confirmed with Dometic (who own Atwood now) that the Atwood 91349 that you've got can be replaced by the Replacement Control Panel for Atwood Water Heaters #AT91367 you were looking at.
view full answer...You don't necessarily have to use the included ground wire on the Jensen #44US01R, but as it was mentioned in the answer that you had looked at, it will help make sure you've got as clear of a signal as possible. With that said, I…
view full answer...We do have the controller that you need, but the Lippert Controller #LC135666 is not the correct controller. I contacted the manufacturer about the correct replacement controller for your power gear 140-1163 rev 01 controller and they informed me…
view full answer...I reached out to the manufacturer and was able to confirm the correct replacement for the Power Gear Slide-Out Controller 1510000013 is the Lippert Slide-Out Controller part #LC38TF.
view full answer...For the module you'll want the Replacement Sensing Control Panel for Power Gear Single Rail Above Floor Sofa Slide-Out #LC27WJ and for the harness you'll need the Replacement Wiring Harness for Lippert Power Gear Slide-Out…
view full answer...The easiest solution to upgrade your WFCO model WF-8955PEC converter is to use the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, part #PD4655V. This is a direct replacement for the converter/lower unit, so you would…
view full answer...The only exterior light we currently carry compatible with 120v would be the Exterior LED Utility Light #M337FR. This light is a flush mount and would require you to cut a hole in the side of your enclosed trailer and would sit inside the walls/in…
view full answer...We have a 6 foot long RV AM/FM antenna with the Jensen In-Wall Antenna #AN140. It's not a whip antenna that sticks up as it instead is a flexible antenna that does not need to stick up. We do not have any 5 to 6 foot whip antennas.
view full answer...The purpose of the ground on the Jensen Antenna - Rooftop or Side Mount part #AN519 is to eliminate static electricity, as well as protect against energy to the mast if the antenna comes in contact with live electrical wires.
view full answer...