Products Featured in this Video
Today we'll taking a look at and showing you how to install the Camco Gen-Turi RV Generator Exhaust System. Part number CAM44461. The Camco Gen-Turi RV Generator Exhaust System cuts down on noise and lifts harmful fumes up away from the fun. First let's listen to our RV's generator without the Gen-Turi installed. Oh, that smells so bad. Okay.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Ark Drop Down Corner RV Stabilizer Jacks #AR94FR does include the mounting plate which is loosely installed on the jack. This plate has a flat surface area which is 4.6" long x 1.83" wide. It would typically be welded directly…
view full answer...The weld-on mounting bracket for the ARK #AR94FR Drop Down Corner RV Stabilizer Jacks measures 4-5/8 x 2-7/8 inches. The bracket has holes for the hardware that attaches the jack to the brackets. The holes are 2-7/8 inches apart on center.…
view full answer...The Ark Drop Down Corner RV Stabilizer Jacks - 2-1/2' Long Corner Steadies - Qty 2 #AR94FR you were looking at would do a great job of keeping your 2021 Rockwood Roo 21SSl steady, and offer a much larger foot than a standard scissor jack so…
view full answer...The Replacement 90-Degree Exhaust Pipe for Camco Gen-Turi RV Generator Exhaust System #CAM44812 you mention has an inner diameter of 1.53" and an outer diameter of 1.51".
view full answer...The Lippert Components Trailair by Center Point Air-Ride Suspension Upgrade - Triple Axle #LC1565401 are an easy install that require no welding. The Air Ride Equalizers simply bolt into hangers to replace your current equalizers. The kit comes with…
view full answer...I believe you mean Load Range since the Load Ranger was the unsuccessful brother of the Lone Ranger. For any given tire size there can be different load ranges. The different load ranges have different weight capacities. This has to do with the…
view full answer...In order to install the Camco Gen-Turi RV Generator Exhaust System part #CAM44461 on a motorhome where the exhaust pipe is turned down towards the ground you'll need to cut that section of the exhaust pipe off. Once this is done, you can use the…
view full answer...The Camco Gen-Turi RV Generator Exhaust System #CAM44461 is a very basic exhaust extension, so your question about rain is valid. I reached out to the manufacturer and they said that there isn't an issue with any large amounts of water getting…
view full answer...The Camco Gen-Turi Replacement 30" EMT 90-Degree Discharge Pipe #CAM44812 has the same diameter aside from the shorter end where it gets larger to accept a 1-1/2" diameter pipe. You can to cut the longer end so that it is shorter and…
view full answer...What you could do is use the 30 inch, 90 degree adapter for the Gen-Turi part #CAM44812 with the Gen-Ture part #CAM44461 to route the exhaust around the slide out.
view full answer...For your generator exhaust, the Camco Gen-Turi Replacement 30" EMT 90-Degree Discharge Pipe #CAM44812 is designed to be used with the Camco Gen-Turi RV Generator Exhaust System #CAM44461. With that being said, we have not tested the #CAM44812…
view full answer...The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…
view full answer...